ST TSV852IDT

Manufacturer No:

TSV852IDT

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

2 Channels 70mA per Channel 27nA 72 dB Instrumentational OP Amps 0.11?A 2.5V~5.5V TSV852 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TSV852IDT information

ST TSV852IDT technical specifications, attributes, parameters and parts with similar specifications to ST TSV852IDT.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
20 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~125°C

Packaging
Tape & Reel (TR)

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
2

Supply Voltage
2.7V

Base Part Number
TSV852

Pin Count
8

Output Type
Rail-to-Rail

Number of Channels
2

Operating Supply Current
130?A

Output Current
26mA

Slew Rate
0.7V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
72 dB

Current - Input Bias
27nA

Voltage - Supply, Single/Dual (±)
2.5V~5.5V

Output Current per Channel
70mA

Input Offset Voltage (Vos)
4mV

Bandwidth
1.3MHz

Unity Gain BW-Nom
1300 kHz

Voltage Gain
110dB

Average Bias Current-Max (IIB)
0.11?A

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
6V

Low-Bias
NO

Micropower
YES

Bias Current-Max (IIB) @25C
0.06?A

Programmable Power
NO

Power
NO

Height
1.25mm

Length
5mm

Download datasheets and manufacturer documentation for ST TSV852IDT.

Datasheets:

stmicroelectronics-tsv851aict-datasheets-1886.pdf

stmicroelectronics-tsv852idt-datasheets-4425.pdf

stmicroelectronics-tsv852idt-datasheets-4426.pdf

stmicroelectronics-tsv852idt-datasheets-4427.pdf

TSV852IDT Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 4mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 130?A, this op amp ic can operate. 110dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.

TSV852IDT Features

8 Pins
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail

TSV852IDT Applications

There are a lot of STMicroelectronics
TSV852IDT Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.