TI LF347BDRG4

Manufacturer No:

LF347BDRG4

Manufacturer:

Package:

SOIC

Description:

4 Channels 50pA 80 dB Instrumentational OP Amps 0.0002?A 18V 14 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LF347BDRG4 information

TI LF347BDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI LF347BDRG4.

Type
Parameter

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
14

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
70°C

Min Operating Temperature
0°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
15V

Terminal Pitch
1.27mm

Pin Count
14

Operating Supply Voltage
18V

Power Supplies
+-15V

Temperature Grade
COMMERCIAL

Operating Supply Current
8mA

Nominal Supply Current
11mA

Slew Rate
13 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
80 dB

Current - Input Bias
50pA

Input Offset Voltage (Vos)
3mV

Bandwidth
3MHz

Gain Bandwidth Product
3MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
3000 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.0002?A

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
18V

Low-Bias
YES

Min Dual Supply Voltage
3.5V

Bias Current-Max (IIB) @25C
0.0002?A

Length
8.65mm

Height Seated (Max)
1.75mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI LF347BDRG4.

LF347BDRG4 Overview

In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape & Reel case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 14 pins on it. Op amp rates 3mV as input offset voltage. Using an 8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 100dB for the time being. On the buffer amps, there are 4 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. The linear amplifier is packaged by using a TAPE AND REEL axis. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part.

LF347BDRG4 Features

14 Pins
supply voltage of 15V
100dB voltage gain

LF347BDRG4 Applications

There are a lot of Texas Instruments
LF347BDRG4 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.