ST TSH114ID

Manufacturer No:

TSH114ID

Manufacturer:

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

47mA per Channel 3μA 58 dB Instrumentational OP Amps 6V 5V~12V ±2.5V~6V TSH114 14 Pins 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TSH114ID information

ST TSH114ID technical specifications, attributes, parameters and parts with similar specifications to ST TSH114ID.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Number of Pins
14

Operating Temperature
-40°C~85°C

Packaging
Tube

JESD-609 Code
e4

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Operational Amplifiers

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
2.5V

Terminal Pitch
1.27mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
30

Base Part Number
TSH114

Pin Count
14

Operating Supply Voltage
6V

Number of Elements
4

Power Supplies
+-2.5/+-6/+5/+12V

Operating Supply Current
4mA

Nominal Supply Current
20mA

Output Current
47mA

Slew Rate
450V/μs

Amplifier Type
Current Feedback

Common Mode Rejection Ratio
58 dB

Current - Input Bias
3μA

Voltage - Supply, Single/Dual (±)
5V~12V ±2.5V~6V

Output Current per Channel
47mA

Input Offset Voltage (Vos)
3mV

Gain Bandwidth Product
100MHz

Neg Supply Voltage-Nom (Vsup)
-2.5V

Power Supply Rejection Ratio (PSRR)
49dB

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
7V

Voltage - Input Offset
900μV

Low-Bias
NO

Micropower
NO

Programmable Power
NO

Download datasheets and manufacturer documentation for ST TSH114ID.

Datasheets:

stmicroelectronics-tsh111id-datasheets-8095.pdf

TSH114ID Overview

The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Current Feedback types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 2.5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifiers device. 14 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 4mA . It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage.

TSH114ID Features

14 Pins
supply voltage of 2.5V

TSH114ID Applications

There are a lot of STMicroelectronics
TSH114ID Instrumentational OP Amps applications.

Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.