ST L6206N

Manufacturer No:

L6206N

Manufacturer:

Package:

24-PowerDIP (0.300, 7.62mm)

Description:

Tube 24-PowerDIP (0.300, 7.62mm) Logic 8V~52V Through Hole -25°C~125°C TJ DC Motors, Stepper Motors, Voltage Regulators Half Bridge (4) Inductive 8V~52V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

L6206N information

ST L6206N technical specifications, attributes, parameters and parts with similar specifications to ST L6206N.

Type
Parameter

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
24-PowerDIP (0.300, 7.62mm)

Number of Pins
24

Operating Temperature
-25°C~125°C TJ

Packaging
Tube

JESD-609 Code
e3

Feature
Bootstrap Circuit

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
24

ECCN Code
EAR99

Resistance
300mOhm

Terminal Finish
Matte Tin (Sn) - annealed

Applications
DC Motors, Stepper Motors, Voltage Regulators

Subcategory
Motion Control Electronics

Technology
BCDMOS

Voltage - Supply
8V~52V

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
48V

Base Part Number
L6206

Pin Count
24

Number of Outputs
4

Max Output Current
5.6A

Operating Supply Voltage
48V

Supply Voltage-Min (Vsup)
8V

Number of Channels
2

Interface
Logic

Analog IC - Other Type
STEPPER MOTOR CONTROLLER

Nominal Supply Current
10mA

Output Configuration
Half Bridge (4)

Output Current
2.8A

Output Current per Channel
2.8A

Rise Time
250ns

Collector Emitter Voltage (VCEO)
52V

Max Collector Current
2.8A

Release Time
550 ns

Voltage - Load
8V~52V

Fault Protection
Current Limiting, Over Temperature, UVLO

Rds On (Typ)
300m ?

Motor Type
Brushed

Current - Peak Output
5.6A

Load Type
Inductive

Height
3.3mm

Length
31.75mm

Width
6.6mm

Download datasheets and manufacturer documentation for ST L6206N.

Datasheets:

stmicroelectronics-l6206pd-datasheets-6563.pdf

stmicroelectronics-l6206n-datasheets-7800.pdf

stmicroelectronics-l6206n-datasheets-7801.pdf

stmicroelectronics-l6206n-datasheets-7802.pdf

L6206N Overview

In order to package H bridge, Tube is used.H bridge is included in the 24-PowerDIP (0.300, 7.62mm) package as a cost-saving measure.Based on the supply voltage of 8V~52V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Through Hole.Motor driver H bridge is possible for -25°C~125°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, Stepper Motors, Voltage Regulators.On the PCB H gate is mounted using Through Hole.Full bridge also has a number of specific characteristics, including Bootstrap Circuit.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 24 terminations are employed.Signal interfaces include 24 pins that serve as pronged contacts.The base H bridge ic number of L6206 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 48V is required.H bridge circuit contains an analog IC type STEPPER MOTOR CONTROLLER.During a specified ambient temperature, the power supply can supply the maximum load current 5.6A.A maximum current is reached by output when H-bridge reaches 5.6A.The power supply pins and the output pins are conducting a current of 2.8A.It is through the 24 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 4.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.The operating supply voltage is maintained at 48V in order to ensure high efficiency.Hbridge 52V releases voltage.

L6206N Features

Available in 24-PowerDIP (0.300, 7.62mm) Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : L6206
Subcategory: 5.6A
Number of Receivers: 48V

L6206N Applications

There are a lot of STMicroelectronics
L6206N Full Bridge Drivers, Half-Bridge Drivers applications.

Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules
Notebook Computers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.