ST STM32F722RCT6

STM32F722RCT6                 Description

The STM32F722xx and STM32F723xx devices are based on the high-performance Arm? Cortex?-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex?-M7 core features a single floating point unit (SFPU) precision which supports Arm? single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security. The STM32F722xx and STM32F723xx devices incorporate high-speed embedded memories with a Flash memory up to 512 Kbytes, 256 Kbytes of SRAM (including 64 Kbytes of data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.

 STM32F722RCT6        Features  

? Core: Arm? 32-bit Cortex?-M7 CPU with FPU,

adaptive real-time accelerator (ART

Accelerator) and L1-cache: 8 Kbytes of data

cache and 8 Kbytes of instruction cache,

allowing 0-wait state execution from embedded

Flash memory and external memories,

frequency up to 216 MHz, MPU,

462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1)

and DSP instructions.

? Memories

? Up to 512 Kbytes of Flash memory with

protection mechanisms (read and write

protections, proprietary code readout

protection (PCROP))

? 528 bytes of OTP memory

? SRAM: 256 Kbytes (including 64 Kbytes of

data TCM RAM for critical real-time data) +

16 Kbytes of instruction TCM RAM (for

critical real-time routines) + 4 Kbytes of

backup SRAM (available in the lowest

power modes)

? Flexible external memory controller with up

to 32-bit data bus: SRAM, PSRAM,

SDRAM/LPSDR SDRAM, NOR/NAND

memories

? Dual mode Quad-SPI

? Clock, reset and supply management

? 1.7 V to 3.6 V application supply and I/Os

? POR, PDR, PVD and BOR

? Dedicated USB power

? 4-to-26 MHz crystal oscillator

? Internal 16 MHz factory-trimmed RC (1%

accuracy)

? 32 kHz oscillator for RTC with calibration

? Internal 32 kHz RC with calibration

? Low-power

? Sleep, Stop and Standby modes

STM32F722RCT6                 Applications

? Motor drive and application control,

? Medical equipment,

? Industrial applications: PLC, inverters, circuit breakers,

? Printers, and scanners,

? Alarm systems, video intercom, and HVAC,

? Home audio appliances,

? Mobile applications, Internet of Things,

? Wearable devices: smartwatches.