PI6C2405A-1WE-DIODES-Price, Stock & Datasheet

PI6C2405A-1WE Overview

The Tube method is used for packaging clock ICs. As part of the 8-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 8 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, TTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 133MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. It has been classified as a Zero Delay Buffer electronic part, which means that it is a semiconductor. It is possible to find its related electronic parts by searching for the base part number PI6C2405. There are 8 pins on the frequency generators that are available for use. Supply voltage 3.3V is what clock generator can handle. In general, this clock PLL is considered a Clock Drivers device. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. The digital clock generator has 5 high-enable output pins. By searching for parts that belong to the 6C family, you can find electronic parts that are similar.