ADI LTC1384CSW#PBF

LTC1384CSW#PBF Overview

LED drivers with the enhanced SO-18 package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Rail/Tube format.Since this part is a Low Power can transceiver, a number of solutions have been able to utiliLow Powere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 4.5V ~ 5V.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is 0°C ~ 70°C. It is primarily designed for applications with low temperatures.A package consisting of 18 market standard pinouts is provided with this integrated circuit.It is a 18-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a capability of 2-bit resolution with this ic receiver.Typically, the resolution of this receiver is specified to be 2 bits.There is a voltage supply of 5 V required in order for this transceiver module to be operated.It is possible to subcategoriInterface ICse this rf transceiver module as Interface ICs.IC 5 V is a high performance driver IC designed to work with a 5 V power supply.There are 1 transceivers in total that this module isolated transceiver implements.The box contains 2 receivers.On the integrator circuit are embedded 2 Driver drivers.A transceiver module's temperature less than 70 °C must be used for operation.This optical transceiver must not be operated at a temperature below 0 °C when it is at its minimum operating temperature.Additionally, the optical transceiver module's 2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function provides improved signal management accuracy and stability.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.5 mA.Using a 350 uA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.It is specified that the transceiver's maximum supply voltage for this IC shall be 5 V.IC type LINE TRANSCEIVER is used to control and manage sharing of information between devices on ic receiver.With the assistance of an antenna, 2 transmitters transmit or send data by generating radio waves.As part of the 18-SO supplier package, this line driver ic is integrated into the system.One of the integrating circuits in the LTC1384 series represents a technique for enhancing power effintegrating circuitiency.The output current of this bluetooth transceiver is 20 mA.The rf transceiver module has 18 terminals, including those on the external side.

LTC1384CSW#PBF Features

Rail/Tube package
18 pin count
18 pins
5 V power supply
LTC1384 series
18 terminals used for its configuration

LTC1384CSW#PBF Applications

There are a lot of Analog Devices
LTC1384CSW#PBF Drivers/Receivers/Transceivers applications.

• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC
• Desktop radio
• Clock radio
• Tuner
• Portable radio