ONSEMI LM224M

Manufacturer No:

LM224M

Manufacturer:

ONSEMI

Package:

SOIC

Description:

40mA per Channel 150nA 70 dB Instrumentational OP Amps 0.3μA 15V 14 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LM224M information

ONSEMI LM224M technical specifications, attributes, parameters and parts with similar specifications to ONSEMI LM224M.

Type
Parameter

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
14

JESD-609 Code
e3

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Max Operating Temperature
85°C

Min Operating Temperature
-25°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
5V

Terminal Pitch
1.27mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
14

Qualification Status
Not Qualified

Operating Supply Voltage
15V

Number of Elements
4

Max Supply Voltage
32V

Min Supply Voltage
3V

Operating Supply Current
1mA

Nominal Supply Current
1.2mA

Power Dissipation
640mW

Slew Rate
0.4 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
70 dB

Current - Input Bias
150nA

Output Current per Channel
40mA

Input Offset Voltage (Vos)
5mV

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.3μA

Power Supply Rejection Ratio (PSRR)
65dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
16V

Micropower
YES

Min Dual Supply Voltage
1.5V

Bias Current-Max (IIB) @25C
0.15μA

Length
8.56mm

Height Seated (Max)
1.8mm

Download datasheets and manufacturer documentation for ONSEMI LM224M.

ReachStatement:

onsemiconductor-rmpa2550-reachstatement-3729.pdf

LM224M Overview

In order to protect the op amps, a SOIC case is used. There are two types of operational amplifiers in this circuit. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 5mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . 100dB should remain the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -25°C degrees Fahrenheit at any time. Instrumentation amplifier shouldn't be used above 85°C . For the operating supply voltage of the op amp ic, there is a rating of 4. The operating supply voltage of the buffer op amp is rated at 15V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 32V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 3V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 16V.

LM224M Features

14 Pins
supply voltage of 5V
100dB voltage gain

LM224M Applications

There are a lot of Fairchild (ON Semiconductor)
LM224M Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.