Microchip KSZ9897STXC

The KSZ9897 is a fully integrated layer 2, managed, seven-port gigabit Ethernet switch with numerous advanced features. Five of the seven ports incorporate 10/100/1000 Mbps PHYs. The other two ports have interfaces that can be configured as SGMII, RGMII, MII or RMII. Either of these may connect directly to a host processor or to an external PHY.

Full register access is available by SPI or I²C interfaces, and by optional in-band management via any of the data ports. PHY register access is provided by a MIIM interface.

Security features include support for IEEE 802.1X port-based authentication and Access Control List (ACL) filtering.

An assortment of power-management features including Energy-Efficient Ethernet (EEE) have been designed in to satisfy energy efficient environments.

Software support is provided through Linux DSA and the Microchip GitHub. Looking for a Linux^® Host Processor, try the SAMA5D3.

Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

• Non-blocking wire-speed Ethernet switching fabric

• Full-featured forwarding and filtering control, including Access Control List (ACL) filtering

• IEEE802.1X support (Port-Based Network Access Control)

• IEEE802.1Q VLAN support for 128 active VLAN groups and the full range of 4096 VLAN IDs

• IEEE802.1p/Q tag insertion or removal on a per port basis and support for double-tagging

• VLAN ID tag/untag options on per port basis

• IEEE802.3x full-duplex flow control and half-duplex back pressure collision control

• IGMPv1/v2/v3 snooping for multicast packet filtering

• IPv6 multicast listener discovery (MLD) snooping

• QoS/CoS packets prioritization support: 802.1p, DiffServ-based and re-mapping of 802.1p priority field per-port basis on four priority levels

• IPv4/IPv6 QoS support

• Programmable rate limiting at ingress and egress ports

• Broadcast storm protection

• Four priority queues with dynamic packet mapping for IEEE802.1p, IPv4 DIFFSERV, IPv6 TrafficClass

• MAC filtering function to filter or forward unknown unicast, multicast and VLAN packets

• Self-address filtering for implementing ring topologies 

• High-speed SPI (4-wire, up to 50MHz) interface to access all internal registers

• I2C Interface to access all registers

• MII management (MIIM, MDC/MDIO 2 wire) interface to access all PHY registers per IEEE 802.3 specification

• In-band management to access all registers via any of the seven ports, strap enabled

• I/O pin strapping facility to set certain register bits from I/O pins at reset time 

• Control registers configurable on-the-fly

• Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII

• MIB counters for fully-compliant statistics gathering (34 MIB counters per port)

• Full-chip software power-down

• Energy detect power-down (EDPD)

• Wake on LAN (WoL) support