ROHM BU9880GUL-WE2

Manufacturer No:

BU9880GUL-WE2

Manufacturer:

ROHM

Package:

6-UFBGA, CSPBGA

Description:

1.8/5V V Surface Mount 8 Pin Memory IC BU9880 64 kb kb 1.98mm mm

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BU9880GUL-WE2 information

ROHM BU9880GUL-WE2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BU9880GUL-WE2.

Type
Parameter

Factory Lead Time
16 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
6-UFBGA, CSPBGA

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2012

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

HTS Code
8542.32.00.51

Technology
CMOS

Voltage - Supply
1.7V~5.5V

Terminal Position
BOTTOM

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
2.5V

Terminal Pitch
0.5mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
BU9880

Pin Count
8

JESD-30 Code
R-PBGA-B8

Supply Voltage-Max (Vsup)
5.5V

Power Supplies
1.8/5V

Supply Voltage-Min (Vsup)
1.7V

Interface
2-Wire, I2C, Serial

Memory Size
64Kb 8K x 8

Memory Type
Non-Volatile

Operating Mode
SYNCHRONOUS

Clock Frequency
400kHz

Supply Current-Max
0.002mA

Memory Format
EEPROM

Memory Interface
I2C

Organization
8KX8

Memory Width
8

Write Cycle Time - Word, Page
5ms

Density
64 kb

Standby Current-Max
0.000002A

Serial Bus Type
I2C

Endurance
1000000 Write/Erase Cycles

Write Cycle Time-Max (tWC)
5ms

Data Retention Time-Min
40

Write Protection
HARDWARE

I2C Control Byte
1010000R

Length
1.98mm

Download datasheets and manufacturer documentation for ROHM BU9880GUL-WE2.

BU9880GUL-WE2 Overview

In this case, the memory type of the device can be classified as Non-Volatile. Case Tape & Reel (TR) is available. An embedded 6-UFBGA, CSPBGA case surrounds memory ics. It is estimated that the memory size on the chip is 64Kb 8K x 8. As with most mainstream devices, this one uses EEPROM-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. With 1.7V~5.5V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 8 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 2.5V to be supplied to this ic memory chip in order to operate. In order to operate effectively, the memory rotates at a clock frequency within a range of 400kHz. A device's base part number, BU9880, is often used in order to identify similar components. The memory device has a total of 8 pins, thus indicating that it has a total of 8 memory locations. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. In terms of power requirements, this memory chip uses only 1.8/5V . It is helpful to carry data to the CPU using the I2C-type serial bus that this memory integrates with. In terms of power consumption, it can operate at a maximum supply of 0.002mA .

BU9880GUL-WE2 Features

Package / Case: 6-UFBGA, CSPBGA

BU9880GUL-WE2 Applications

There are a lot of ROHM Semiconductor
BU9880GUL-WE2 Memory applications.

networking
personal computers
servers
supercomputers
telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.