ZL2004ALNFT1-01-Renesas-Price, Stock & Datasheet

ZL2004ALNFT1-01 Overview

In the QFN package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 32 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 8.6V. There are 32 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 8V. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 10V. You should keep dc regulator at 0°C degrees or higher. There should be 65°C temperature above 65°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. In dormant mode, 16mA is used. Designing voltage regulators switchings with 32 pins. Switching can take place at a maximum frequency of 400kHz. This is an ideal solution for switching controllers with 40A inputs. During normaloperations, it outputs a value of 1.1V.