INFINEON BTS500601TEAAUMA2

Manufacturer No:

BTS500601TEAAUMA2

Manufacturer:

INFINEON

Package:

TO-252-5, DPak (4 Leads + Tab), TO-252AD

Description:

P-Channel PMIC PROFET® Series BTS50060 5 Pin TO-252-5, DPak (4 Leads + Tab), TO-252AD

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BTS500601TEAAUMA2 information

INFINEON BTS500601TEAAUMA2 technical specifications, attributes, parameters and parts with similar specifications to INFINEON BTS500601TEAAUMA2.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-252-5, DPak (4 Leads + Tab), TO-252AD

Number of Pins
5

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
PROFET®

Published
2010

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
4

ECCN Code
EAR99

Resistance
6.8mOhm

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Reach Compliance Code
not_compliant

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
BTS50060

JESD-30 Code
R-PSSO-G4

Number of Outputs
1

Output Type
P-Channel

Supply Voltage-Max (Vsup)
5V

Supply Voltage-Min (Vsup)
3.3V

Interface
On/Off

Nominal Supply Current
12mA

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Halogen Free
Halogen Free

Output Current per Channel
16.5A

Nominal Input Voltage
13.5V

Ratio - Input:Output
1:1

Voltage - Load
6V~19V

Fault Protection
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO

Output Peak Current Limit-Nom
75A

Rds On (Typ)
6.8m ?

Built-in Protections
OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE

Output Current Flow Direction
SINK

Width
6.22mm

RoHS Status
RoHS Compliant

Lead Free
Contains Lead

Download datasheets and manufacturer documentation for INFINEON BTS500601TEAAUMA2.

BTS500601TEAAUMA2 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.As you can see, it comes from the BTS50060 family.A total of 4 terminations can be found in it.During operation, the 5 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 16.5A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 6.8mOhm resistance in the LED driving board.It is included in the PROFET® series.The maximum supply voltage for this lighting driver is set to 5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3.3V.

BTS500601TEAAUMA2 Features

Resistance of 6.8mOhm

BTS500601TEAAUMA2 Applications

There are a lot of Infineon Technologies
BTS500601TEAAUMA2 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.