WINBOND W25Q16DVSSJG

Manufacturer No:

W25Q16DVSSJG

Manufacturer:

WINBOND

Package:

8-SOIC (0.209, 5.30mm Width)

Description:

3/3.3V V SpiFlash® 8 Pin Memory IC SpiFlash® Series 5.28mm mm

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

W25Q16DVSSJG information

WINBOND W25Q16DVSSJG technical specifications, attributes, parameters and parts with similar specifications to WINBOND W25Q16DVSSJG.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.209, 5.30mm Width)

Surface Mount
YES

Operating Temperature
-40°C~105°C TA

Packaging
Tube

Series
SpiFlash®

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

Terminal Finish
MATTE TIN

Technology
FLASH - NOR

Voltage - Supply
2.7V~3.6V

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
3V

Terminal Pitch
1.27mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
8

JESD-30 Code
S-PDSO-G8

Qualification Status
Not Qualified

Supply Voltage-Max (Vsup)
3.6V

Supply Voltage-Min (Vsup)
2.7V

Memory Size
16Mb 2M x 8

Memory Type
Non-Volatile

Operating Mode
SYNCHRONOUS

Clock Frequency
104MHz

Supply Current-Max
0.03mA

Memory Format
FLASH

Memory Interface
SPI - Quad I/O

Organization
16MX1

Memory Width
1

Write Cycle Time - Word, Page
50μs, 3ms

Standby Current-Max
0.000025A

Memory Density
16777216 bit

Parallel/Serial
SERIAL

Programming Voltage
2.7V

Serial Bus Type
SPI

Endurance
100000 Write/Erase Cycles

Data Retention Time-Min
20

Write Protection
HARDWARE/SOFTWARE

Length
5.28mm

Height Seated (Max)
2.16mm

Width
5.28mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for WINBOND W25Q16DVSSJG.

W25Q16DVSSJG Overview

Non-Volatile is its memory type. It is available in a case with a Tube shape. As you can see, it is embedded in 8-SOIC (0.209, 5.30mm Width) case. There is an 16Mb 2M x 8 memory capacity on the chip. In this device, the memory is of the FLASH-format, which is a popular format in the mainstream computing sector. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.7V~3.6V is possible to be applied to the supply. There is a recommendation that Surface Mount mounting type should be used for this product. As you can see from the diagram, the chip is planted with 8 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 3V power supply. With a clock frequency of 104MHz, the memory rotates on its own. It has 8 pins indicating it has 8 memory locations. This memory chip requires a mere 3/3.3V of power. Among the SpiFlash® series of memory devices, this part is essential for its applications. By integrating with the SPI-type serial bus, this memory transmits data to the processor. This memory ics is capable of operating with an input current of 0.03mA at max. A programming voltage of 2.7V is needed to alter the state of certain nonvolatile memory arrays.

W25Q16DVSSJG Features

Package / Case: 8-SOIC (0.209, 5.30mm Width)

W25Q16DVSSJG Applications

There are a lot of Winbond Electronics
W25Q16DVSSJG Memory applications.

telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders
embedded logic
eDRAM
graphics card
hard disk drive (HDD)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.