ST VNB35NV04

Manufacturer No:

VNB35NV04

Manufacturer:

Package:

TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Description:

N-Channel 2.54mm PMIC OMNIFET II?, VIPower? Series VNB35 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNB35NV04 information

ST VNB35NV04 technical specifications, attributes, parameters and parts with similar specifications to ST VNB35NV04.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Number of Pins
3

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Series
OMNIFET II?, VIPower?

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
2

ECCN Code
EAR99

Resistance
13mOhm

Terminal Finish
Matte Tin (Sn) - annealed

Voltage - Rated DC
40V

Max Power Dissipation
125W

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
245

Number of Functions
1

Terminal Pitch
2.54mm

Current Rating
30A

Base Part Number
VNB35

JESD-30 Code
R-PSSO-G2

Number of Outputs
1

Output Type
N-Channel

Max Output Current
45A

Operating Supply Voltage
18V

Interface
On/Off

Nominal Supply Current
100?A

Output Configuration
Low Side

Power Dissipation
125W

Output Current
30A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
100?A

Input Type
Non-Inverting

Turn On Delay Time
12 ?s

Switch Type
General Purpose

Output Current per Channel
30A

Drain to Source Voltage (Vdss)
40V

Turn-Off Delay Time
120 ?s

Continuous Drain Current (ID)
35A

Ratio - Input:Output
1:1

Gate to Source Voltage (Vgs)
20V

Voltage - Load
36V Max

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Download datasheets and manufacturer documentation for ST VNB35NV04.

Datasheets:

stmicroelectronics-vnb35nv04-datasheets-7984.pdf

VNB35NV04 Overview

It is packaged in the form of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the VNB35 family.A total of 2 terminations can be found in it.During operation, the 3 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 45A.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 3 pins.In this case, there is 13mOhm resistance in the LED driving board.It is included in the OMNIFET II?, VIPower? series.This results in a 30A output current.For maximum efficiency, the supply voltage should be set to 18V.This system has a maximum current requirement of 100?A.

VNB35NV04 Features

Resistance of 13mOhm

VNB35NV04 Applications

There are a lot of STMicroelectronics
VNB35NV04 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.