TI UC3572DTRG4

Manufacturer No:

UC3572DTRG4

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

8 Terminals 4.75V~30V 8-Pin UC3572 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 100kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

UC3572DTRG4 information

TI UC3572DTRG4 technical specifications, attributes, parameters and parts with similar specifications to TI UC3572DTRG4.

Type
Parameter

Contact Plating
Gold

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Weight
72.603129mg

Operating Temperature
0°C~70°C TA

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Subcategory
Switching Regulator or Controllers

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Base Part Number
UC3572

Function
Step-Up/Step-Down

Number of Outputs
1

Output Voltage
-70V

Output Type
Transistor Driver

Operating Supply Voltage
30V

Analog IC - Other Type
SWITCHING CONTROLLER

Output Configuration
Negative

Output Current
500mA

Voltage - Supply (Vcc/Vdd)
4.75V~30V

Control Features
Current Limit, Ramp

Input Voltage (Min)
4.75V

Topology
Flyback

Control Mode
VOLTAGE-MODE

Frequency - Switching
100kHz

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
No

Switcher Configuration
SINGLE

Max Frequency
300kHz

Max Duty Cycle
92 %

Length
4.9mm

Width
3.9mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI UC3572DTRG4.

Datasheets:

texasinstruments-uc2572n-datasheets-1687.pdf

texasinstruments-uc3572dtrg4-datasheets-6306.pdf

UC3572DTRG4 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.75V~30V voltage are supplied and operated. A 0°C~70°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 100kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Ramp. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. UC3572 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. 4.75V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is -70V. You should note down the dc dc regulator's usual output current of 500mA when you start a project. A duty cycle set at 92 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 300kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 30V.

UC3572DTRG4 Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
Max Duty Cycle: 92 %

UC3572DTRG4 Applications

There are a lot of Texas Instruments
UC3572DTRG4 DC to DC converter applications.

Computer application technology
Network technology
Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.