TS2DDR2811ZXYR-TI-Price, Stock & Datasheet

TS2DDR2811ZXYR Overview

As the electronic part is packed in 20-UFBGA, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 20. The electronic part provides high-quality output because it has 8 channels. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 20 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with TS2DDR2811 to find analog multiplexer variants. An switch multiplexer with 6Ohm internal resistance has a value of 6Ohm. Datasheets for 20 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 3.6V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 3V. An operating current of 250?A would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 3V~3.6V volts. When the digital multiplexer is charged above 500?A, damage can occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There are 1.1 GHz bandwidths for data transfer.