TI TLV2473IDGQ

Manufacturer No:

TLV2473IDGQ

Manufacturer:

Package:

10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

Description:

35mA per Channel 2.5pA 64 dB Instrumentational OP Amps 0.0003?A 3V 2.7V~6V ±1.35V~3V TLV2473 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2473IDGQ information

TI TLV2473IDGQ technical specifications, attributes, parameters and parts with similar specifications to TI TLV2473IDGQ.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

Number of Pins
10

Operating Temperature
-40°C~125°C

Packaging
Tube

Pbfree Code
yes

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

ECCN Code
EAR99

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
2

Supply Voltage
3V

Terminal Pitch
0.5mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
TLV2473

Pin Count
10

Qualification Status
Not Qualified

Output Type
Rail-to-Rail

Number of Elements
2

Operating Supply Current
600?A

Nominal Supply Current
1.8mA

Power Dissipation
2.39W

Output Current
35mA

Slew Rate
1.5V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
64 dB

Current - Input Bias
2.5pA

Voltage - Supply, Single/Dual (±)
2.7V~6V ±1.35V~3V

Output Current per Channel
35mA

Input Offset Voltage (Vos)
2.2mV

Bandwidth
2.8MHz

Unity Gain BW-Nom
2800 kHz

Voltage Gain
120dB

Average Bias Current-Max (IIB)
0.0003?A

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
7V

Voltage - Input Offset
250?V

Low-Bias
YES

Micropower
NO

Download datasheets and manufacturer documentation for TI TLV2473IDGQ.

TLV2473IDGQ Overview

Packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 10. The pins on this board total to 10 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 10 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 600?A, this op amp ic can operate. 120dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V.

TLV2473IDGQ Features

10 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail

TLV2473IDGQ Applications

There are a lot of Texas Instruments
TLV2473IDGQ Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.