TI TLC4502AIDRG4

Manufacturer No:

TLC4502AIDRG4

Manufacturer:

Package:

Description:

2 Channels 50mA per Channel 60pA 90 dB Instrumentational OP Amps 0.00006?A 8 Pins D

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLC4502AIDRG4 information

TI TLC4502AIDRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLC4502AIDRG4.

Type
Parameter

Package / Case
D

Surface Mount
YES

Number of Pins
8

Packaging
Tape & Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Technology
CMOS

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Pin Count
8

Power Supplies
5V

Temperature Grade
AUTOMOTIVE

Number of Channels
2

Max Supply Voltage
6V

Min Supply Voltage
4V

Operating Supply Current
2.5mA

Current - Output
50mA

Slew Rate
2.5 V/?s

Architecture
CHOPPER-STAB

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
90 dB

Current - Input Bias
60pA

Output Current per Channel
50mA

Input Offset Voltage (Vos)
10?V

Bandwidth
4.7MHz

Gain Bandwidth Product
4.7MHz

Unity Gain BW-Nom
4700 kHz

Voltage Gain
120dB

Average Bias Current-Max (IIB)
0.00006?A

Low-Offset
YES

Frequency Compensation
YES

Max Dual Supply Voltage
3V

Low-Bias
YES

Min Dual Supply Voltage
2V

Bias Current-Max (IIB) @25C
0.00006?A

Max I/O Voltage
50?V

Length
4.9mm

Height Seated (Max)
1.75mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for TI TLC4502AIDRG4.

TLC4502AIDRG4 Overview

It is packaged in an D-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 10?V for input offset voltage. A supply current of 2.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. It is important to keep in mind that the power supply voltage of this electric component is below 6V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 3V volts.

TLC4502AIDRG4 Features

8 Pins
supply voltage of 5V
120dB voltage gain

TLC4502AIDRG4 Applications

There are a lot of Texas Instruments
TLC4502AIDRG4 Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.