TI TL972IPE4

Manufacturer No:

TL972IPE4

Manufacturer:

Package:

PDIP

Description:

2 Channels 80mA per Channel 750pA 60 dB Instrumentational OP Amps 0.75μA 6V 8 Pins PDIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TL972IPE4 information

TI TL972IPE4 technical specifications, attributes, parameters and parts with similar specifications to TI TL972IPE4.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 5 days ago)

Package / Case
PDIP

Surface Mount
NO

Number of Pins
8

JESD-609 Code
e4

Pbfree Code
yes

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TUBE

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
THROUGH-HOLE

Number of Functions
2

Supply Voltage
2.5V

Pin Count
8

Operating Supply Voltage
6V

Temperature Grade
AUTOMOTIVE

Number of Channels
2

Max Supply Voltage
12V

Min Supply Voltage
2.7V

Nominal Supply Current
2.8mA

Slew Rate
5 V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
60 dB

Current - Input Bias
750pA

Output Current per Channel
80mA

Input Offset Voltage (Vos)
1mV

Bandwidth
12MHz

Gain Bandwidth Product
12MHz

Neg Supply Voltage-Nom (Vsup)
-2.5V

Unity Gain BW-Nom
12000 kHz

Voltage Gain
80dB

Average Bias Current-Max (IIB)
0.75μA

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
6V

Low-Bias
NO

Micropower
NO

Min Dual Supply Voltage
1.35V

Bias Current-Max (IIB) @25C
0.75μA

Programmable Power
NO

Nominal Gain Bandwidth Product
12MHz

Download datasheets and manufacturer documentation for TI TL972IPE4.

TL972IPE4 Overview

There is a PDIP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 2.5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 1mV. The buffer amplifier is capable of operating from a supply current of 2mA . It is recommended to keep the voltage gain at 80dB at all times. On the buffer amps, there are 2 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The operating supply voltage of the buffer op amp is rated at 6V. This linear amplifier pack is based on the TUBE axis. Under 12V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 6V.

TL972IPE4 Features

8 Pins
supply voltage of 2.5V
80dB voltage gain

TL972IPE4 Applications

There are a lot of Texas Instruments
TL972IPE4 Instrumentational OP Amps applications.

Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.