ST STOTG04EQTR

Manufacturer No:

STOTG04EQTR

Manufacturer:

Package:

24-VFQFN Exposed Pad

Description:

24 Terminations 3.3V 24 Pin STOTG04 Receivers 1 Bits 1/1 Drivers/Receivers 1 Functions

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

STOTG04EQTR information

ST STOTG04EQTR technical specifications, attributes, parameters and parts with similar specifications to ST STOTG04EQTR.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
14 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
24-VFQFN Exposed Pad

Number of Pins
24

Operating Temperature
-40°C~85°C

Packaging
Tape & Reel (TR)

JESD-609 Code
e3

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
24

ECCN Code
EAR99

Type
Transceiver

Terminal Finish
Matte Tin (Sn)

Subcategory
Line Driver or Receivers

Voltage - Supply
1.6V~5.5V

Terminal Position
QUAD

Peak Reflow Temperature (Cel)
225

Number of Functions
1

Supply Voltage
1.8V

Terminal Pitch
0.5mm

Base Part Number
STOTG04

Pin Count
24

Number of Channels
1

Interface
I2C, UART, USB

Operating Supply Current
17mA

Supply Current-Max
25mA

Data Rate
12 Mbps

Differential Output
YES

Protocol
USB 2.0

Input Characteristics
DIFFERENTIAL

Number of Drivers/Receivers
1/1

Driver Number of Bits
1

Receiver Number of Bits
1

ESD Protection
Yes

Transmit Delay-Max
300 ns

Supply Voltage1-Nom
3.3V

USB
USB 2.0

Output Low Current-Max
0.002A

Out Swing-Min
2.6 V

Ambient Temperature Range High
85°C

Height
1mm

Length
4.1mm

Width
4.1mm

Radiation Hardening
No

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ST STOTG04EQTR.

Datasheets:

stmicroelectronics-stotg04eqtr-datasheets-5326.pdf

STOTG04EQTR Overview

This driver chip is excellent for driving common LEDs due to its enhanced 24-VFQFN Exposed Pad package.The package of this receiver is Tape & Reel (TR).It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 1.6V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 1.8V.Wide receiver has 24 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.Since the base part number STOTG04 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.24-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.There is a voltage input supply of 3.3V required for the operation of this integrated circuit.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.To power the ic receiver, sufficient current but not more than 25mA should be supplied to its VCC pin.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 17mA.In total, this optical transceiver contains 1 channels in order to meet the needs of this apploptical transceiveration.

STOTG04EQTR Features

Tape & Reel (TR) package
24 pin count
24 pins
1 channels

STOTG04EQTR Applications

There are a lot of STMicroelectronics
STOTG04EQTR Drivers/Receivers/Transceivers applications.

Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
Car radio
Satellite radio receiver

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.