ST STM32F334K6T7

STM32F334K6T7 Description

The STM32F334K6T7 family includes the high-performance Arm? Cortex?-M4 32-bit RISC core that operates at up to 72 MHz frequency and embeds a floating point unit (FPU), high-speed embedded memories (up to 64 Kbytes of Flash memory, up to 12 Kbytes of SRAM), and a wide range of enhanced I/Os and peripherals connected to two APB buses.

A low-power RTC, one high-resolution timer, one general-purpose 32-bit timer, one timer for motor control, two quick 12-bit ADCs (5 Msps), up to three ultra-fast comparators, an operational amplifier, three DAC channels, and four quick 16-bit timers are all features of the STM32F334x4/6/8 microcontrollers. Additionally, they have one I2C, one SPI, up to three USARTs, and one CAN in terms of standard and cutting-edge communication interfaces.

The STM32F334x4/6/8 family functions with a 2.0 to 3.6 V power supply in the -40 to +85 °C and -40 to +105 °C temperature ranges. The development of low-power applications is made possible by a wide range of power-saving modes.

Devices are available from the STM32F334x4/6/8 family in 32, 48, and 64-pin packages.

There are several sets of peripherals included depending on the device selected.

STM32F334K6T7 Features

• Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant

• Interconnect matrix

• 7-channel DMA controller

• Up to two ADC 0.20 μs (up to 21 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single-ended / differential mode, separate analog supply from 2.0 to 3.6 V

• Temperature sensor

• Up to three 12-bit DAC channels with analog supply from 2.4 V to 3.6 V

• Core: Arm? Cortex?-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division DSP instruction

• Memories

– Up to 64 Kbytes of Flash memory

– Up to 12 Kbytes of SRAM with HW parity check

– Routine booster: 4 Kbytes of SRAM on instruction and data bus with HW parity check (CCM)

• CRC calculation unit

• Reset and supply management

– Low-power modes: Sleep, Stop, Standby

– VDD,VDDA voltage range: 2.0 to 3.6 V

– Power-on/Power-down reset (POR/PDR)

– Programmable voltage detector (PVD)

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC (up to 64 MHz with PLL option)

– Internal 40 kHz oscillator

STM32F334K6T7 Applications

• Arm? Cortex?-M4 core with FPU with embedded Flash memory and SRAM

• Memories

• Cyclic redundancy check calculation unit (CRC)

• Power management

• Clocks and startup

• Fast analog-to-digital converter (ADC)

• Digital-to-analog converter (DAC)