ST STMPS2252TTR

Manufacturer No:

STMPS2252TTR

Manufacturer:

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Description:

0.65mm PMIC STMPS2252 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

STMPS2252TTR information

ST STMPS2252TTR technical specifications, attributes, parameters and parts with similar specifications to ST STMPS2252TTR.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
12 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Number of Pins
8

Operating Temperature
-40°C~125°C TJ

Packaging
Cut Tape (CT)

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
115MOhm

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Current Rating
500mA

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
STMPS2252

Pin Count
8

Number of Outputs
2

Output Voltage
5V

Max Output Current
500mA

Operating Supply Voltage
5.5V

Number of Channels
2

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Output Configuration
High Side

Output Current
500mA

Voltage - Supply (Vcc/Vdd)
Not Required

Adjustable Threshold
NO

Input Type
Non-Inverting

Turn On Delay Time
5 ms

Switch Type
General Purpose

Min Input Voltage
2.7V

Max Input Voltage
5.5V

Turn-Off Delay Time
10 ms

Ratio - Input:Output
1:2

Voltage - Load
2.7V~5.5V

Fault Protection
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO

Rds On (Typ)
105m ?

Max Junction Temperature (Tj)
125°C

Ambient Temperature Range High
85°C

On-State Resistance
105mOhm

Download datasheets and manufacturer documentation for ST STMPS2252TTR.

Datasheets:

stmicroelectronics-stmps2272mtr-datasheets-7571.pdf

STMPS2252TTR Overview

The LED driver's packaged as a Cut Tape (CT).The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.This object belongs to the STMPS2252 family.It contains 8 terminations.For operation, 8 pins are used.The LED driver has 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.There is 115MOhm resistance on the LED driver.It is set to 500mA in this case.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.In order to maximize efficiency, the supply voltage should be set at 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 2.7V volts.

STMPS2252TTR Features

Supplied from 5V
Resistance of 115MOhm
2 channels

STMPS2252TTR Applications

There are a lot of STMicroelectronics
STMPS2252TTR Power Switches ICs applications.

Portable GPS Device
Set-top-box
USB Power Distribution
Notebook PC
Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.