ST STM32F103R8H6

STM32F103R8H6 Description

The high-performance ARM Cortex?-M3 32-bit RISC core, operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and a wide range of enhanced I/Os and peripherals connected to two APB buses are all included in the STM32F103x8 and STM32F103xB performance line family. All of the devices have up to two I2Cs and SPIs, three USARTs, a USB port, and a CAN, as well as conventional and sophisticated communication interfaces: two 12-bit ADCs, three general-purpose 16-bit timers, and one PWM timer.

The operating voltage range for the STM32F103R8H6 medium-density performance line family is 2.0 to 3.6 V. Both the standard temperature range of -40 to +85 °C and the extended temperature range of -40 to +105 °C are offered. The development of low-power applications is made possible by a wide range of power-saving modes.

The medium-density performance line family STM32F103R8H6 consists of six different package variants, ranging in size from 36 pins to 100 pins. Different sets of peripherals are included depending on the device selected; the description below provides an overview of the full range of peripherals suggested in this family.

STM32F103R8H6 Features

• Debug mode

? Serial wire debug (SWD) & JTAG interfaces

• 7 timers

? Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

? 16-bit, motor control PWM timer with deadtime generation and emergency stop

? 2 watchdog timers (Independent and Window)

? SysTick timer: a 24-bit downcounter

• Up to 9 communication interfaces

? Up to 2 x I2C interfaces (SMBus/PMBus)

? Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

? Up to 2 SPIs (18 Mbit/s)

? CAN interface (2.0B Active)

? USB 2.0 full-speed interface

• CRC calculation unit, 96-bit unique ID

• Packages are ECOPACK?

• Core: ARM 32-bit Cortex?-M3 CPU

? 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

? Single-cycle multiplication and hardware division

• Memories

? 64 or 128 Kbytes of Flash memory

? 20 Kbytes of SRAM

• Clock, reset and supply management

? 2.0 to 3.6 V application supply and I/Os

? POR, PDR, and programmable voltage detector (PVD)

? 4-to-16 MHz crystal oscillator

? Internal 8 MHz factory-trimmed RC

? Internal 40 kHz RC

? PLL for CPU clock

? 32 kHz oscillator for RTC with calibration

• Low power

? Sleep, Stop and Standby modes

? VBAT supply for RTC and backup registers

• 2 x 12-bit, 1 ?s A/D converters (up to 16 channels)

? Conversion range: 0 to 3.6 V

? Dual-sample and hold capability

? Temperature sensor

• DMA

? 7-channel DMA controller

? Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs

• Up to 80 fast I/O ports

? 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

STM32F103R8H6 Applications

• Industrial applications: PLC, inverters, printers, and scanners

• Alarm systems, Video intercom, and HVAC

• Motor drive and application control

• Medical and handheld equipment

• PC peripherals gaming and GPS platforms