TI SN7534050NS

Manufacturer No:

SN7534050NS

Manufacturer:

Package:

16-SOIC (0.209, 5.30mm Width)

Description:

16 Terminations 5V 16 Pin SN7534050 Receivers 2/2 Drivers/Receivers 2 Functions

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN7534050NS information

TI SN7534050NS technical specifications, attributes, parameters and parts with similar specifications to TI SN7534050NS.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 5 days ago)

Factory Lead Time
6 Weeks

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.209, 5.30mm Width)

Surface Mount
YES

Number of Pins
16

Weight
200.686274mg

Operating Temperature
-20°C~85°C

Packaging
Tube

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

ECCN Code
EAR99

Type
Transceiver

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Additional Feature
RECEIVER 3-STATE OUTPUTS

Subcategory
Line Driver or Receivers

Voltage - Supply
4.75V~5.25V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Base Part Number
SN7534050

Pin Count
16

Operating Supply Voltage
5V

Power Supplies
5V

Operating Supply Current
80mA

Propagation Delay
20 ns

Supply Current-Max
110mA

Data Rate
20 Mbps

Output Characteristics
3-STATE

Differential Output
YES

Output Polarity
COMPLEMENTARY

Protocol
RS422, RS485

Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER

Number of Drivers/Receivers
2/2

Receiver Number of Bits
2

Duplex
Half

Receiver Hysteresis
50mV

Number of Drivers
2

Receive Delay-Max
35 ns

Supply Voltage1-Nom
5V

Height
2mm

Length
10.3mm

Width
5.3mm

Download datasheets and manufacturer documentation for TI SN7534050NS.

PCN Packaging:

texasinstruments-cd4043bnsr-pcnpackaging-2028.pdf

texasinstruments-cd4044bnsr-pcnpackaging-0141.pdf

SN7534050NS Overview

This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.209, 5.30mm Width) package.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -20°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 16 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.Since the base part number SN7534050 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.16-pin driver IC with improved power dissipation control.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a voltage input supply of 5V required for the operation of this integrated circuit.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.On the part, 2 drivers are embedded in order to facilitate the operation of the device.ICs with RECEIVER 3-STATE OUTPUTS functions also improve the overall stability and accuracy of signal management.To power the ic receiver, sufficient current but not more than 110mA should be supplied to its VCC pin.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 80mA.

SN7534050NS Features

Tube package
16 pin count
16 pins
5V power supply

SN7534050NS Applications

There are a lot of Texas Instruments
SN7534050NS Drivers/Receivers/Transceivers applications.

Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
Car radio
Satellite radio receiver

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.