TI SN10501DGNG4

Manufacturer No:

SN10501DGNG4

Manufacturer:

Package:

HTSSOP EP

Description:

1 Channels 100mA per Channel 5?A 70 dB Instrumentational OP Amps 5V 8 Pins HTSSOP EP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN10501DGNG4 information

TI SN10501DGNG4 technical specifications, attributes, parameters and parts with similar specifications to TI SN10501DGNG4.

Type
Parameter

Package / Case
HTSSOP EP

Surface Mount
YES

Number of Pins
8

Weight
24.408939mg

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Audio/Video Amplifiers

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Terminal Pitch
0.65mm

Pin Count
8

Operating Supply Voltage
5V

Number of Elements
1

Temperature Grade
INDUSTRIAL

Number of Channels
1

Max Supply Voltage
16V

Min Supply Voltage
2.7V

Operating Supply Current
14mA

Nominal Supply Current
15mA

Power Dissipation
1.71W

Current - Output
100mA

Slew Rate
900 V/?s

Common Mode Rejection Ratio
70 dB

Current - Input Bias
5?A

Output Current per Channel
100mA

Input Offset Voltage (Vos)
25mV

Bandwidth
100000 kHz

Gain Bandwidth Product
120MHz

Voltage Gain
100dB

Power Supply Rejection Ratio (PSRR)
62dB

Settling Time
25 ns

Max Dual Supply Voltage
9V

-3db Bandwidth
170MHz

Min Dual Supply Voltage
1.35V

Dual Supply Voltage
5V

Consumer IC Type
VIDEO AMPLIFIER

Max I/O Voltage
30mV

Height
1.02mm

Length
3mm

Width
3mm

Download datasheets and manufacturer documentation for TI SN10501DGNG4.

SN10501DGNG4 Overview

In the package, you will find a HTSSOP EP-case to contain the op amp ic. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This particular linear amplifier is a type of Audio/Video Amplifiers device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 25mV as input offset voltage. Using an 14mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 100dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 9V volts when you conduct this part. Using the VIDEO AMPLIFIER column, it is possible to sort by the consumer IC type of the electronic ic chip.

SN10501DGNG4 Features

8 Pins
100dB voltage gain

SN10501DGNG4 Applications

There are a lot of Texas Instruments
SN10501DGNG4 Instrumentational OP Amps applications.

Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.