ONSEMI NCV7684DQR2G

ONSEMI NCV7684DQR2G

Manufacturer No:

NCV7684DQR2G

Manufacturer:

ONSEMI

Package:

24-LSSOP (0.154, 3.90mm Width) Exposed Pad

Description:

LED Linear Current Driver, 12 Channels, 60 mA, I2C Controllable

Delivery:

DHL
DHL
DHL
DHL

Payment:

DHL
DHL
DHL
DHL
DHL
DHL
DHL

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

NCV7684DQR2G information

ONSEMI NCV7684DQR2G technical specifications, attributes, parameters and parts with similar specifications to ONSEMI NCV7684DQR2G.

  • Type
  • Parameter
  • VI Max (V)
  • 40
  • IO Max (mA)
  • 60
  • LEDs in Parallel, Max #
  • 12
  • Package Type
  • SSOP-24 NB EP
  • Container Type
  • REEL
  • Container Qty.
  • 2500
  • LEDs in Series, Max #
  • 3
  • Case Outline
  • 940AP
  • MSL Type
  • 3
  • MSL Temp (°C)
  • 260

Download datasheets and manufacturer documentation for ONSEMI NCV7684DQR2G.

Datasheet:

Package Drawing:

The NCV7684 consists of twelve linear programmable constant current sources. The part is designed for use in the regulation and control of LED for automotive applications. The NCV7684 allows 128 different current levels adjustable with pulse width modulation (PWM) programmable via I2C serial interface. The device can be used with micro−controller applications using the I2C bus or in stand−alone applications where a choice could be done in between 2 different configuration settings. The IC also provides 3.3 V voltage reference to the application for loads up to 1 mA.LED brightness level is easily programmed using an external resistor. Each channel has an internal circuitry to detect open−load conditions with an optional auto−recovery mode. If one driver is in open−load condition, all other channels could be turned off according to the programmable bit setting.

Application

  • Dashboard Applications
  • Rear Combination Lamps (RCL)
  • Daytime Running Lights (DRL)
  • Fog Lights
  • Center High Mounted Stop Lamps (CHMSL) Arrays
  • Turn Signal and other Externally Modulated Applications

End Product

  • Automotive

Feature

  • 12 programmable Current Sources Up to 60 mA
  • Common PWM Gain Control via I2C
  • On−chip 125, 250, or 500 Hz PWM
  • Open LED String Diagnostic
  • Low Dropout Operation for Pre−Regulator Applications
  • Single Resistor for Current Set Point
  • Voltage Reference 3.3 V / 1 mA
  • 8 bits I2C Interface with CRC8 Error Detection
  • OTP Bank for Stand−Alone Operation (2 Configurations)
  • Detection and Protection Against Open Load and Under−Voltage
  • Over Temperature Detection and Protection
  • Low Emission with Spread Spectrum Oscillator
  • AEC Q100 Qualified
  • SSOP24−EP Packaging
  • This is a Pb−Free Device

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step1：Prepare product

Step2：Desiccant Protection

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step3：Vacuum Packaging

Step4：Individual Package

Step4：Individual Package

Step5：Anti-collision Filling

Step5：Anti-collision Filling

Step6：Packaging Box

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.

NCV7684DQR2G Relevant information

The following parts are popular search parts in Integrated Circuits (ICs).