Rochester MIC2075-2BMM

Manufacturer No:

MIC2075-2BMM

Manufacturer:

Rochester

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

N-Channel 0.65mm PMIC MM8? Series 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MIC2075-2BMM information

Rochester MIC2075-2BMM technical specifications, attributes, parameters and parts with similar specifications to Rochester MIC2075-2BMM.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Operating Temperature
-40°C~85°C TA

Packaging
Tube

Series
MM8?

JESD-609 Code
e0

Feature
Slew Rate Controlled, Status Flag

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

Terminal Finish
TIN LEAD

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
240

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
30

Pin Count
8

JESD-30 Code
S-PDSO-G8

Number of Outputs
1

Supply Voltage-Max (Vsup)
5.5V

Supply Voltage-Min (Vsup)
2.7V

Number of Channels
1

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Current - Output (Max)
500mA

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Adjustable Threshold
NO

Input Type
Non-Inverting

Switch Type
General Purpose

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Fault Protection
Current Limiting (Fixed), Over Temperature, UVLO

Rds On (Typ)
90m ?

Length
3mm

Width
3mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for Rochester MIC2075-2BMM.

Datasheets:

rochesterelectronicsllc-mic20752bm-datasheets-6036.pdf

rochesterelectronicsllc-mcz33887ekr2-datasheets-1222.pdf

MIC2075-2BMM Overview

It is packaged in the form of a Tube.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.A total of 8 terminations can be found in it.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 500mAV.It is possible to obtain high efficiency with a supply voltage of 5V.This LED driver is equipped with a total of 8 pins.It is included in the MM8? series.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.

MIC2075-2BMM Features

Supplied from 5V
1 channels

MIC2075-2BMM Applications

There are a lot of Rochester Electronics, LLC
MIC2075-2BMM Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.