TI TLV2463IDGSRG4

Manufacturer No:

TLV2463IDGSRG4

Manufacturer:

Package:

VSSOP

Description:

80mA per Channel 14nA 66 dB Instrumentational OP Amps 0.075?A 3V 10 Pins VSSOP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TLV2463IDGSRG4 information

TI TLV2463IDGSRG4 technical specifications, attributes, parameters and parts with similar specifications to TI TLV2463IDGSRG4.

Type
Parameter

Package / Case
VSSOP

Surface Mount
YES

Number of Pins
10

Packaging
Tape & Reel

JESD-609 Code
e4

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
125°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TAPE AND REEL

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
3V

Terminal Pitch
0.5mm

Pin Count
10

Operating Supply Voltage
3V

Number of Elements
2

Temperature Grade
AUTOMOTIVE

Min Supply Voltage
2.7V

Operating Supply Current
550?A

Nominal Supply Current
1.3mA

Power Dissipation
485mW

Current - Output
80mA

Slew Rate
1.6 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
66 dB

Current - Input Bias
14nA

Output Current per Channel
80mA

Input Offset Voltage (Vos)
2mV

Bandwidth
6.4MHz

Gain Bandwidth Product
6.4MHz

Unity Gain BW-Nom
5200 kHz

Voltage Gain
109dB

Average Bias Current-Max (IIB)
0.075?A

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
3V

Low-Bias
NO

Micropower
NO

Min Dual Supply Voltage
1.35V

Download datasheets and manufacturer documentation for TI TLV2463IDGSRG4.

Datasheets:

texasinstruments-tlv2463idgsrg4-datasheets-3190.pdf

texasinstruments-tlv2463idgsrg4-datasheets-3191.pdf

TLV2463IDGSRG4 Overview

There is a VSSOP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape & Reel case. We are approaching the 10h termination of the year. In total, there are 10 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 10 pins are located on the operational amplifiers. The input offset voltage is 2mV. The buffer amplifier is capable of operating from a supply current of 550?A . It is recommended to keep the voltage gain at 109dB at all times. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 3V. This linear amplifier pack is based on the TAPE AND REEL axis. Under 6V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 3V.

TLV2463IDGSRG4 Features

10 Pins
supply voltage of 3V
109dB voltage gain

TLV2463IDGSRG4 Applications

There are a lot of Texas Instruments
TLV2463IDGSRG4 Instrumentational OP Amps applications.

Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.