ADI MAX1953EUB+

MAX1953EUB+ Overview

In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3V~5.5V volts and has 3V~5.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "MAX1953", there are other relevant dc to dc converter ics you can find. There are 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 4.73V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 10A. Voltage regulator dc to dc is designed to operate at 89 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1.2MHz is set for the switching controller. Hence, ALSO OPERATES IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. Voltage 3V must be supplied. An output current greater than 4A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 4.5V volts at its peak. A voltage controller's lowest output voltage cannot be less than 800mV.

MAX1953EUB+ Features

Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 89 %
Frequency: 1.2MHz
ALSO OPERATES IN CURRENT MODE

MAX1953EUB+ Applications

There are a lot of Maxim Integrated
MAX1953EUB+ DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment