Rochester MAX1694EUB

Manufacturer No:

MAX1694EUB

Manufacturer:

Rochester

Package:

10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Description:

P-Channel 0.5mm PMIC 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX1694EUB information

Rochester MAX1694EUB technical specifications, attributes, parameters and parts with similar specifications to Rochester MAX1694EUB.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Operating Temperature
-40°C~85°C TA

Packaging
Tube

JESD-609 Code
e0

Feature
Status Flag

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

Terminal Finish
TIN LEAD

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
245

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.5mm

Reach Compliance Code
unknown

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
10

Number of Outputs
1

Qualification Status
COMMERCIAL

Output Type
P-Channel

Supply Voltage-Min (Vsup)
2.7V

Number of Channels
1

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Current - Output (Max)
700mA

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Adjustable Threshold
NO

Input Type
Non-Inverting

Switch Type
USB Switch

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Fault Protection
Current Limiting (Fixed), Over Temperature

Rds On (Typ)
60m ?

Length
3mm

Width
3mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for Rochester MAX1694EUB.

Datasheets:

rochesterelectronicsllc-max1694eub-datasheets-0394.pdf

rochesterelectronicsllc-max1662eub-datasheets-8152.pdf

MAX1694EUB Overview

It is packaged in the form of a Tube.It is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.A total of 10 terminations can be found in it.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 700mAV.It is possible to obtain high efficiency with a supply voltage of 5V.This LED driver is equipped with a total of 10 pins.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.

MAX1694EUB Features

Supplied from 5V
1 channels

MAX1694EUB Applications

There are a lot of Rochester Electronics, LLC
MAX1694EUB Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.