M74HC4053B1R-ST-Price, Stock & Datasheet

M74HC4053B1R Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. A total of 3 circuits make up this switch device. Search with M74HC405 if you are looking for analog multiplexer variants. It has an internal resistance of 180Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 8?A. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. There are 6 inputs to be operated. The transfer of data can be performed over 200MHz bandwidths. The Drain to Source resistance of this electronic component is 180Ohm.