TI LMC6772BIM/NOPB

Manufacturer No:

LMC6772BIM/NOPB

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

Surface Mount Tube 30mA mA 4000 ns ?s Linear Comparators 100dB dB 40 fA pA 20?A ?A 15mV mV Surface Mount

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LMC6772BIM/NOPB information

TI LMC6772BIM/NOPB technical specifications, attributes, parameters and parts with similar specifications to TI LMC6772BIM/NOPB.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 3 days ago)

Factory Lead Time
6 Weeks

Contact Plating
Tin

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Number of Pins
8

Operating Temperature
-40°C~85°C

Packaging
Tube

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

Termination
SMD/SMT

ECCN Code
EAR99

Type
General Purpose

Subcategory
Comparator

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
2

Supply Voltage
5V

Pin Count
8

Output Type
Open Drain

Number of Elements
2

Nominal Supply Current
20?A

Output Current
30mA

Max Supply Current
20?A

Propagation Delay
10 ?s

Quiescent Current
20?A

Turn On Delay Time
4 ?s

Response Time
4000 ns

Common Mode Rejection Ratio
75 dB

Voltage - Supply, Single/Dual (±)
2.7V~15V ±1.35V~7.5V

Input Offset Voltage (Vos)
15mV

Voltage Gain
100dB

Average Bias Current-Max (IIB)
4e-7?A

Power Supply Rejection Ratio (PSRR)
80dB

Supply Voltage Limit-Max
16V

Max Input Current
40 fA

Dual Supply Voltage
3V

Input Bias Current
40 fA

Voltage - Input Offset (Max)
15mV @ 5V

Current - Input Bias (Max)
0.04pA @ 5V

CMRR, PSRR (Typ)
75dB CMRR, 80dB PSRR

Download datasheets and manufacturer documentation for TI LMC6772BIM/NOPB.

LMC6772BIM/NOPB Overview

In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.We ship the part through Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for LMC6772 to find more pin-to-pin solutions for your specific needs.There is 20?A current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 20?A .A current supply greater than 20?A may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 40 fA current into the device.Comparator electronics follows that the voltage gain of the part is 100dB .

LMC6772BIM/NOPB Features

Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20?A
Voltage Gain: 100dB

LMC6772BIM/NOPB Applications

There are a lot of Texas Instruments
LMC6772BIM/NOPB linear comparators applications.

Current and voltage sensing
Analog front end
Power management
Point of load regulators
DC/DC and AC/DC power supplies
System control and monitoring
Wearable Devices
Mobile Phones and Tablets
Battery-Powered Electronics
General Purpose Low Voltage Applications

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.