INFINEON IPS1011SPBF

Manufacturer No:

IPS1011SPBF

Manufacturer:

INFINEON

Package:

TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Description:

N-Channel PMIC IPS1011SPBF 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

IPS1011SPBF information

INFINEON IPS1011SPBF technical specifications, attributes, parameters and parts with similar specifications to INFINEON IPS1011SPBF.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Number of Pins
3

Supplier Device Package
D2PAK

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Published
2006

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Termination
SMD/SMT

Resistance
10mOhm

Max Operating Temperature
150°C

Min Operating Temperature
-40°C

Power Rating
3.1W

Max Power Dissipation
3.1W

Current Rating
18A

Base Part Number
IPS1011SPBF

Number of Outputs
1

Output Voltage
28V

Output Type
N-Channel

Max Output Current
6.5A

Operating Supply Voltage
5.5V

Interface
On/Off

Min Supply Voltage
4.5V

Current - Output (Max)
6.5A

Output Configuration
Low Side

Power Dissipation
3.1W

Output Current
85A

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Clamping Voltage
36V

Output Current per Channel
6.5A

Rise Time
50?s

Drain to Source Voltage (Vdss)
36V

Fall Time (Typ)
70 ?s

Nominal Input Voltage
5.5V

Continuous Drain Current (ID)
6.5A

Ratio - Input:Output
1:1

Voltage - Load
28V Max

Fault Protection
Current Limiting (Fixed), Over Temperature

Dual Supply Voltage
28V

Rds On (Typ)
10mOhm

Nominal Vgs
1.7 V

Height
4.826mm

Length
10.668mm

Download datasheets and manufacturer documentation for INFINEON IPS1011SPBF.

ConflictMineralStatement:

infineon-b43821a4225m000-conflictmineralstatement-7662.pdf

IPS1011SPBF Overview

It is packaged in the manner of a Tube.There is a TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The IPS1011SPBF family consists of this type.In order to operate, the 3 pins are used.In terms of output, the lighting driver can provide a maximum of 6.5A V.In order to meet the operation criteria, the maximum output current drops to 6.5A.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 10mOhm resistance.In this case, the output current will be set to 85A.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.For stable operation, the maximum operating temperature should be 150°C°C.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.You can also run it at 4.5V volts if required.

IPS1011SPBF Features

Resistance of 10mOhm

IPS1011SPBF Applications

There are a lot of Infineon Technologies
IPS1011SPBF Power Switches ICs applications.

Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.