ADI MAX773CPD+

Manufacturer No:

MAX773CPD+

Manufacturer:

ADI

Package:

14-DIP (0.300, 7.62mm)

Description:

14 Terminals 3V~16.5V 14-Pin MAX773 DC to DC converter IC SWITCHING CONTROLLER Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

MAX773CPD+ information

ADI MAX773CPD+ technical specifications, attributes, parameters and parts with similar specifications to ADI MAX773CPD+.

Type
Parameter

Factory Lead Time
6 Weeks

Mount
Through Hole

Mounting Type
Surface Mount

Package / Case
14-DIP (0.300, 7.62mm)

Number of Pins
14

Operating Temperature
0°C~70°C TA

Packaging
Tube

Published
1997

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Not For New Designs

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

Termination
Through Hole

ECCN Code
EAR99

Terminal Finish
Matte Tin (Sn)

Additional Feature
SELECTABLE REGULATING VOLTAGE

Subcategory
Switching Regulator or Controllers

Technology
BICMOS

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
260

Terminal Pitch
2.54mm

Frequency
300kHz

Base Part Number
MAX773

Output Voltage
15V

Output Type
Transistor Driver

Max Output Current
1A

Input Voltage-Nom
5V

Analog IC - Other Type
SWITCHING CONTROLLER

Output Configuration
Positive

Output Current
1A

Voltage - Supply (Vcc/Vdd)
3V~16.5V

Control Features
Enable, Low Battery

Max Output Voltage
15V

Topology
Boost

Control Mode
CURRENT-MODE

Max Input Voltage
16.5V

Control Technique
PULSE FREQUENCY MODULATION

Synchronous Rectifier
No

Min Output Voltage
5V

Duty Cycle
90 %

Number of Output Phases
1

Height Seated (Max)
4.572mm

Width
7.62mm

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for ADI MAX773CPD+.

Datasheets:

maximintegrated-max771epa-datasheets-7463.pdf

maximintegrated-max5858aecmd-datasheets-5095.pdf

maximintegrated-max773cpd-datasheets-9500.pdf

ConflictMineralStatement:

maximintegrated-ds1075z66n-conflictmineralstatement-7504.pdf

MAX773CPD+ Overview

As a result of 14-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 3V~16.5V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Low Battery. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 14. Some of the control techniques used by these dc dc converter ics are PULSE FREQUENCY MODULATION. It is inputted with a DC switcher's voltage of 5V. A search for "MAX773" will reveal other relevant dc to dc converter ics. 14 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 15V voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at 300kHz Hz. DC to DC voltage regulator has the value of SELECTABLE REGULATING VOLTAGE to better satisfy the requirement. In order to limit the voltage of a dc switcher whose maximum input voltage is 16.5V, it must be limited by the user. Input current cannot exceed 1A with this dc switcher. At its maximum, the switching converter can output 15V volts. At its lowest voltage, the voltage controller does not produce less than 5V. With this controller, the phase is 1.

MAX773CPD+ Features

Transistor Driver Outputs
Enable, Low Battery
PULSE FREQUENCY MODULATION
Frequency: 300kHz
SELECTABLE REGULATING VOLTAGE

MAX773CPD+ Applications

There are a lot of Maxim Integrated
MAX773CPD+ DC to DC converter applications.

Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment
Injection molding machinery

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.