TI INA111AUE4

Manufacturer No:

INA111AUE4

Manufacturer:

Package:

SOIC

Description:

30mA per Channel 20pA 100 dB Instrumentational OP Amps 0.00002μA 16 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

INA111AUE4 information

TI INA111AUE4 technical specifications, attributes, parameters and parts with similar specifications to TI INA111AUE4.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Contact Plating
Gold

Package / Case
SOIC

Surface Mount
YES

Number of Pins
16

Weight
420.395078mg

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
16

ECCN Code
EAR99

Resistance
10 TΩ

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Instrumentation Amplifier

Packing Method
TUBE

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
15V

Pin Count
16

Number of Elements
3

Temperature Grade
INDUSTRIAL

Max Supply Voltage
36V

Min Supply Voltage
12V

Operating Supply Current
3.3mA

Nominal Supply Current
4.5mA

Quiescent Current
3.3mA

Slew Rate
17 V/μs

Amplifier Type
INSTRUMENTATION AMPLIFIER

Common Mode Rejection Ratio
100 dB

Current - Input Bias
20pA

Output Current per Channel
30mA

Input Offset Voltage (Vos)
1mV

Bandwidth
2MHz

Gain Bandwidth Product
2MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Voltage Gain
80dB

Average Bias Current-Max (IIB)
0.00002μA

Max Dual Supply Voltage
18V

-3db Bandwidth
2MHz

Min Dual Supply Voltage
6V

Dual Supply Voltage
15V

Input Voltage Noise Density
10nV/sqrt Hz

Voltage Gain-Nom
10

Non-linearity-Max
0.04%

Download datasheets and manufacturer documentation for TI INA111AUE4.

INA111AUE4 Overview

Packaged in a SOIC case, the buffer op amp is ready to use. An op amp ic of the INSTRUMENTATION AMPLIFIER type. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. As long as the supply current of the chip does not exceed 3.3mA, this op amp ic can operate. 80dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The linear amplifier consists of 3 different elements in total. For packing the buffer amplifier, the TUBE-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 36V. A high supply voltage of more than 12V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. Currently, linear amplifier is operating with a quiescent current of 3.3mA. Instrumentation amplifier resistance should stay within the range of 10 TΩ.

INA111AUE4 Features

16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10 TΩ

INA111AUE4 Applications

There are a lot of Texas Instruments
INA111AUE4 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.