IDT74FCT16500CTPVG-Renesas-Price, Stock & Datasheet

IDT74FCT16500CTPVG Overview

A copy of it is embedded in the package SSOP. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 56 terminations. Keeping the supply voltage above 5V is necessary for normal operation of the device. There is a 56 pin count that is included in this device. With 18 Bits, you can design electronic parts in a very flexible way. An example of this is through the use of 2 terminations, where a particular device is used to end a transmission line with an impedance matching device, fitted with its characteristic impedance. It is mounted in the way of Surface Mount so that this electronic part can be seen. The 56 pins are designed to be a part of it. The FCT family is made up of a number of electronic devices, one of which is this device, that belong to the genre of electronic devices. There is a maximum voltage supply (Vsup) reached when 5.5V is reached. A higher supply voltage (Vsup) should be used than the lower supply voltage (4.5V). Powered by 5V power supplies, it runs on a battery. There is a trigger configured with NEGATIVE EDGE for this device. WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION is one of the characteristics of this type of system as well. The high level output current is represented by 64mA. There should be a higher operating temperature than -40°C during the operation. It is ideal to have an operating temperature that is lower than 85°C.