ONSEMI FTL11639UCX

Manufacturer No:

FTL11639UCX

Manufacturer:

ONSEMI

Package:

12-UFBGA, WLCSP

Description:

Configurable Load Switch and Reset Timer

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FTL11639UCX information

ONSEMI FTL11639UCX technical specifications, attributes, parameters and parts with similar specifications to ONSEMI FTL11639UCX.

Type
Parameter

Container Qty.
3000

IQ Typ (µA)
5

Watchdog Timer
No

Package Type
WLCSP-12

MSL Type
1

MSL Temp (°C)
260

Voltages Monitored
1

VCC Max (V)
5.5

Reset Active State
Low

Container Type
REEL

V(TO) Typ (V)
-

Manual Reset
No

Case Outline
567RZ

Reset Timer
Yes

Download datasheets and manufacturer documentation for ONSEMI FTL11639UCX.

Datasheet:

67158111e5d628b0bd1f9b080b449cda.pdf

Package Drawing:

67292f2a08d2870ceecc31712b2f70db.pdf

The FTL11639 is both a timer for resetting a mobile device and an advanced load management device for applications requiring a highly integrated solution.If the mobile device is off, holding /SR0 LOW (by pressing power-on key) for 38 ms ±20% turns on the PMIC.As a reset timer, it has one input and one fixed delay output. It generates a fixed delay of 11.5 s ±20% by disconnecting the PMIC from the battery power supply. FTL11639 does not accept a new input signal for 400 ms ±20% to give the PMIC enough time to turn off.The reset delay can be customized by connecting an external resistor to the DELAY_ADJ pin.As an advanced load management switch, the FTL11639 disconnects loads powered from the DC power rail (<6 V) with stringent off-state current targets and high load capacitances (up to 200 µF). The FTL11639 consists of a slew-rate controlled low-impedance MOSFET switch (21 mΏ typical at 4.5 V) that has exceptionally low off-state current drain (<0.2 µA typical) to facilitate compliance with standby power requirements. The slew-rate-controlled turn-on characteristic prevents inrush current and the resulting excessive voltage drop on power rails. The low ICCT enables direct interface to lower-voltage chipsets without external translation, while maintaining low power consumption.The device is packaged in advanced, fully “green,” 1.31 mm x 1.62 mm, Wafer-Level Chip-Scale Packaging (WLCSP); providing excellent thermal conductivity, small footprint, and low electrical resistance for a wide application range.

Application

Consumer
Consumer Appliances
E-book Reader
Mobile Handsets
Mobile Comm Infrastructure
Portable Devices
Portable Navigation

Feature

Factory Customized Turn-on Time: 38 ms
Factory Customized Turn-off Delay: 900 ms
Factory Programmed Reset Delay: 11.5 s
Factory Programmed Reset Pulse: 400 ms
Low < 0.2 µA Typical Shutdown Current
Off Pin Turns Off Load Switch to Maintain Battery Charge during Shipment and Inventory (Ready to Use Right Out of the Box)
Typical R_ON: 21 mΩ (Typ.) at V_BAT=4.5 V
3.8 A / 4.5 A Maximum Continuous Current (JEDEC 2S2P, No VIA / with Thermal VIA)
Adjustable Reset Delay by an External Resistor (Optional)
Low I_CCT Saves Power Interfacing to Low-Voltage Chips
Input Voltage Operating Range: 1.2 V to 5.5 V
Over-Voltage Protection: Allow Input Pins > VBAT
Slew Rate / Inrush Control with t_R: 2.7 ms (Typical)
Output Capacitor Discharge Function
IEC61000-4-2, Level 4 compliant SYS_WAKE Pin
Zero-Second Test-Mode Enable
8 kV HBM ESD (per JESD22-A114)
ESD Protected:
2 kV CDM (per JESD22-C101)
10 kV HBM ESD (Pin to Pin, V_BAT & V_OUT)

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.