TI SN74ACT574DWRE4

Manufacturer No:

SN74ACT574DWRE4

Manufacturer:

Package:

SOIC

Description:

8 Bit Flip Flop DUAL 20 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

SN74ACT574DWRE4 information

TI SN74ACT574DWRE4 technical specifications, attributes, parameters and parts with similar specifications to TI SN74ACT574DWRE4.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Mount
Surface Mount

Package / Case
SOIC

Number of Pins
20

Weight
500.709277mg

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
20

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Bus Driver/Transceiver

Packing Method
TR

Technology
CMOS

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Frequency
110MHz

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Qualification Status
Not Qualified

Operating Supply Voltage
5V

Polarity
Non-Inverting

Power Supplies
5V

Temperature Grade
INDUSTRIAL

Number of Circuits
8

Max Supply Voltage
5.5V

Min Supply Voltage
4.5V

Load Capacitance
50pF

Number of Ports
2

Current - Output
24mA

Number of Bits
8

Propagation Delay
11 ns

Turn On Delay Time
7 ns

Family
ACT

Logic Function
D-Type, Flip-Flop

Logic IC Type
BUS DRIVER

Max I(ol)
0.024 A

High Level Output Current
-24mA

Low Level Output Current
24mA

Control Type
INDEPENDENT CONTROL

Power Supply Current-Max (ICC)
0.04mA

Number of Input Lines
3

Download datasheets and manufacturer documentation for TI SN74ACT574DWRE4.

SN74ACT574DWRE4 Overview

SOICis the packaging method. The Tape & Reel (TR)package contains it. A total of 20terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as ACT. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a Bus Driver/Transceiverbase part number assigned to the RS flip flops. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TR. A total of 5V power supplies are needed to run it. This flip flop has a total of 2ports. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 1output lines. A total of 3input lines have been provided. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 110MHz. The logic IC it uses is BUS DRIVER. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 20. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.

SN74ACT574DWRE4 Features

Tape & Reel (TR) package
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count

SN74ACT574DWRE4 Applications

There are a lot of Texas Instruments
SN74ACT574DWRE4 Flip Flops applications.

Shift Registers
Storage Registers
Bounce elimination switch
Data storage
Data transfer
Latch
Registers
Memory
Frequency division
Memory

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.