EL5227CLZ-T7-Renesas-Price, Stock & Datasheet

EL5227CLZ-T7 Overview

A QFN EP case is used to package the op amp. BUFFER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 24 terminations in the next few months. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Buffer Amplifier device. There are 24 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. An 1.3mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 8 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. The operating supply voltage of the buffer op amp is rated at 15V. I would like to point out that this electrical component is capable of working from a voltage below 16.5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 4.5V at all times. The dual supply voltage of 8.25V should be used for the conduct of this electronic component.