ROHM BD82000FVJ-LBE2

Manufacturer No:

BD82000FVJ-LBE2

Manufacturer:

ROHM

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

N-Channel 0.65mm PMIC 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BD82000FVJ-LBE2 information

ROHM BD82000FVJ-LBE2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BD82000FVJ-LBE2.

Type
Parameter

Factory Lead Time
8 Weeks

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Surface Mount
YES

Operating Temperature
-40°C~85°C TA

Packaging
Cut Tape (CT)

Published
2014

Feature
Slew Rate Controlled, Status Flag

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

JESD-30 Code
S-PDSO-G8

Number of Outputs
1

Output Type
N-Channel

Max Output Current
1A

Supply Voltage-Max (Vsup)
5.5V

Interface
On/Off

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
USB Switch

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Fault Protection
Current Limiting (Fixed), Over Temperature, UVLO

Turn On Time
20000 µs

Output Peak Current Limit-Nom
1A

Rds On (Typ)
70m ?

Turn Off Time
40 µs

Built-in Protections
OVER CURRENT; THERMAL; UNDER VOLTAGE

Output Current Flow Direction
SINK

Length
3mm

Width
3mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ROHM BD82000FVJ-LBE2.

BD82000FVJ-LBE2 Overview

It is packaged in the form of a Cut Tape (CT).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.A total of 8 terminations can be found in it.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.

BD82000FVJ-LBE2 Features

Supplied from 5V

BD82000FVJ-LBE2 Applications

There are a lot of ROHM Semiconductor
BD82000FVJ-LBE2 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.