ROHM BA4564RFV-E2

Manufacturer No:

BA4564RFV-E2

Manufacturer:

ROHM

Package:

14-LSSOP (0.173, 4.40mm Width)

Description:

50nA 90 dB Instrumentational OP Amps 0.8μA 8V~30V ±4V~15V 14 Pins 14-LSSOP (0.173, 4.40mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

BA4564RFV-E2 information

ROHM BA4564RFV-E2 technical specifications, attributes, parameters and parts with similar specifications to ROHM BA4564RFV-E2.

Type
Parameter

Factory Lead Time
6 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-LSSOP (0.173, 4.40mm Width)

Number of Pins
14

Operating Temperature
-40°C~105°C

Packaging
Tape & Reel (TR)

Published
2012

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Subcategory
Operational Amplifiers

Packing Method
TAPE AND REEL

Max Power Dissipation
875mW

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
4

Supply Voltage
15V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Pin Count
14

Power Supplies
+-15V

Number of Circuits
4

Operating Supply Current
6mA

Supply Current-Max
15mA

Slew Rate
4V/μs

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
General Purpose

Common Mode Rejection Ratio
90 dB

Current - Input Bias
50nA

Voltage - Supply, Single/Dual (±)
8V~30V ±4V~15V

Input Offset Voltage (Vos)
500μV

Bandwidth
4MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
4000 kHz

Average Bias Current-Max (IIB)
0.8μA

Low-Offset
NO

Frequency Compensation
YES

Supply Voltage Limit-Max
18V

Low-Bias
NO

Micropower
NO

Bias Current-Max (IIB) @25C
0.5μA

Programmable Power
NO

Neg Supply Voltage-Max (Vsup)
-18V

Download datasheets and manufacturer documentation for ROHM BA4564RFV-E2.

BA4564RFV-E2 Overview

Packaging for the buffer amplifier is in the form of a 14-LSSOP (0.173, 4.40mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiersed as a Operational Amplifiers-type device. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using a supply current of 6mA , this buffer op amp will be able to operate. The buffer amp consists of 4 circuits in total. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.

BA4564RFV-E2 Features

14 Pins
supply voltage of 15V

BA4564RFV-E2 Applications

There are a lot of ROHM Semiconductor
BA4564RFV-E2 Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.