INFINEON AUIPS72211R

Manufacturer No:

AUIPS72211R

Manufacturer:

INFINEON

Package:

TO-252-5, DPak (4 Leads + Tab), TO-252AD

Description:

6/60V N-Channel PMIC Automotive, AEC-Q100 Series AUIPS72211R 28V TO-252-5, DPak (4 Leads + Tab), TO-252AD

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AUIPS72211R information

INFINEON AUIPS72211R technical specifications, attributes, parameters and parts with similar specifications to INFINEON AUIPS72211R.

Type
Parameter

Factory Lead Time
23 Weeks

Mounting Type
Surface Mount

Package / Case
TO-252-5, DPak (4 Leads + Tab), TO-252AD

Surface Mount
YES

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Series
Automotive, AEC-Q100

Published
2011

JESD-609 Code
e3

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
4

ECCN Code
EAR99

Terminal Finish
Tin (Sn)

Subcategory
Peripheral Drivers

Terminal Position
SINGLE

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
28V

Reach Compliance Code
compliant

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
AUIPS72211R

JESD-30 Code
R-PSSO-G4

Qualification Status
Not Qualified

Output Type
N-Channel

Supply Voltage-Max (Vsup)
60V

Power Supplies
6/60V

Supply Voltage-Min (Vsup)
6V

Interface
On/Off

Output Configuration
High Side

Input Type
Non-Inverting

Switch Type
General Purpose

Ratio - Input:Output
1:1

Voltage - Load
6V~60V

Driver Number of Bits
1

Fault Protection
Current Limiting (Fixed), Over Temperature

Rds On (Typ)
30m ?

Built-in Protections
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE

Output Current Flow Direction
SINK

Length
6.54mm

Height Seated (Max)
2.39mm

Width
6.095mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for INFINEON AUIPS72211R.

Datasheets:

infineontechnologies-auips72211r-datasheets-0583.pdf

PCN Packaging:

infineontechnologies-irgb4045dpbf-pcnpackaging-5217.pdf

AUIPS72211R Overview

It is packaged in the form of a Tube.It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the AUIPS72211R family.A total of 4 terminations can be found in it.It is important to note that the LED driving board has 1 functions.It is possible to obtain high efficiency with a supply voltage of 28V.It is included in the Automotive, AEC-Q100 series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 60V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 6V.It has a power supply of 6/60V.

AUIPS72211R Features

Supplied from 28V

AUIPS72211R Applications

There are a lot of Infineon Technologies
AUIPS72211R Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.