Microchip ATA6570-GNQW1

Manufacturer No:

ATA6570-GNQW1

Manufacturer:

Microchip

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

CAN PN Transceiver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ATA6570-GNQW1 information

Microchip ATA6570-GNQW1 technical specifications, attributes, parameters and parts with similar specifications to Microchip ATA6570-GNQW1.

Type
Parameter

Bitrate Max [MBits/s]
5

INH Pin
Yes

Operating Voltage [V] Max
28

Operating Voltage [V] Min
4.55

SPI Interface
Yes

TempRange [°C] Max
150

TempRange [°C] Min
-40

CAN FD
Yes

Wake Pin
Yes

Download datasheets and manufacturer documentation for Microchip ATA6570-GNQW1.

The ATA6570 is a CAN Partial Networking (PN) transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two wire CAN bus. It is designed for high speed CAN applications in the automotive environment. It provides local and enhanced remote wake-up capabilities. The Microchip ATA6570 has a very low power consumption in Standby and Sleep Mode. Beside local wake-up via WAKE and remote wake-up pattern according to ISO 11898-2: 2016 and also additionally supports ISO11898-2: 2016 compliant CAN partial networking. A CAN frame decoder evaluates the bus traffic and checks for a matching frame, that has been configured in the registers via SPI. The device is able to keep the complete ECU in a low power mode even when bus traffic is present until a valid wake-up frame is received.

It also features a watchdog, a Serial Peripheral Interface (SPI) and automatic adjustment of the I/O levels to the I/O level of the connected microcontroller via the VIO pin.

The Microchip ATA6570 is a CAN-FD capable device. Wakeup via Wake-up frames can be configured to be either CAN-FD tolerant (CAN-FD frames are ignored) or to increase an error counter when receiving FD frames.

The Transceiver also offers Normal, Standby and Silent mode to configure the TX/RX path. This configuration is done via SPI.

To purchase the ATA6570 or obtain additional information, please contact any Microchip sales representative or authorized worldwide distributor.

Please see our MikroElektronika click Board! https://www.mikroe.com/ata6570-click

An MCAL driver is available upon request as described here: https://www.microchip.com/en-us/solutions/automotive-and-transportation/software

Please contact your local Sales representative.

High speed CAN PN transceiver Fully ISO 11898-2, ISO 11898-5, ISO 11898-2: 2016 and SAE J2962-2 compliant

ISO 26262 FuSa Ready

Autonomous bus biasing according to ISO 11898-6

Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)

Standard CAN data rate up to 1Mbit/s and CAN FD data rate up to 5Mbit/s (CAN FD)

Differential bus receiver with wide common mode range

Very low current consumption in Sleep and Standby with fully wake-up capability

Power-down of the complete node via the INH-output (switching off external voltage regulator(s))

T wake-up sources Local wake-up via pin WAKE Remote wake-up pattern according to ISO 11898-5 Remote wake-up frame according to ISO 11898-6 (selective wake-up) Host wake-up via SPI Wake-up source recognition

Local wake-up via pin WAKE

Remote wake-up pattern according to ISO 11898-5

Wake-up source recognition

3.3V to 5V microcontrollers can be interfaced directly via the VIO pin

Battery supply and CAN bus pins protected against transients according to ISO7637

High Electro Static Discharge (ESD) Handling Capability on the Bus Pins

Bus pins short-circuit protected to GND and VCC

VS operating voltage up to 28V, VS DC supply voltage up to 40V

AEC-Q100 and AEC-Q006 qualified

Fulfills the OEM Hardware Requirements for CAN Interfaces in Automotive Applications, Rev. 1.3

Fulfills the OEM Requirements for Partial Networking Rev. 2.2

SOIC14 and DFN14 package with wettable flanks

Transmit data (TXD) dominant timeout function
RXD recessive clamping detection
Power-on Reset (POR)
Overtemperature protection
Undervoltage detection on VS, VCC and VIO pins
Transceiver disengages from the bus in over-temperature and low power supply mode
Bus Recessive/Dominant Clamping Detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.