DIODES AP2411MP-13

Manufacturer No:

AP2411MP-13

Manufacturer:

DIODES

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Description:

P-Channel 0.65mm PMIC AP2411 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AP2411MP-13 information

DIODES AP2411MP-13 technical specifications, attributes, parameters and parts with similar specifications to DIODES AP2411MP-13.

Type
Parameter

Factory Lead Time
18 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

Published
2012

JESD-609 Code
e3

Feature
Load Discharge, Status Flag

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Resistance
84mOhm

Terminal Finish
Matte Tin (Sn)

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
5V

Terminal Pitch
0.65mm

Time@Peak Reflow Temperature-Max (s)
40

Pin Count
8

Number of Outputs
1

Output Type
P-Channel

Max Output Current
2A

Number of Channels
1

Interface
On/Off

Analog IC - Other Type
POWER SUPPLY SUPPORT CIRCUIT

Output Configuration
High Side

Output Current
2A

Voltage - Supply (Vcc/Vdd)
Not Required

Adjustable Threshold
NO

Input Type
Non-Inverting

Turn On Delay Time
1.5 ms

Switch Type
USB Switch

Min Input Voltage
2.7V

Max Input Voltage
5.5V

Nominal Input Voltage
5.5V

Turn-Off Delay Time
100 ?s

Ratio - Input:Output
1:1

Voltage - Load
2.7V~5.5V

Fault Protection
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO

Rds On (Typ)
70m ?

Height
950?m

Download datasheets and manufacturer documentation for DIODES AP2411MP-13.

Environmental Information:

diodesincorporated-desd5v0s1ba7-environmentalinformation-9032.pdf

AP2411MP-13 Overview

As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.A USB Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Load Discharge, Status Flag features.It comes under the family of AP2411.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 2A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.8 pins are connected to it in total.Currently, the LED driving board has 84mOhm resistance.As a result, the output current is set to 2A.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.Input voltage is limited to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.

AP2411MP-13 Features

Supplied from 5V
Resistance of 84mOhm
1 channels

AP2411MP-13 Applications

There are a lot of Diodes Incorporated
AP2411MP-13 Power Switches ICs applications.

PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.