ADI ADP1882ARMZ-0.3-R7

ADP1882ARMZ-0.3-R7 Overview

As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 2.75V~20V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 300kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 10. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "ADP1882" will reveal other relevant dc to dc converter ics. 10 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 17V voltage. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 84 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC to DC voltage regulator has the value of MINIMUM OUTPUT VOLTAGE 0.8V to better satisfy the requirement. In order to limit the voltage of a dc switcher whose maximum input voltage is 5.5V, it must be limited by the user. Voltage 2.75V is necessary for the supply. Input current cannot exceed 25A with this dc switcher. At its maximum, the switching converter can output 4.67V volts. The supply current of the voltage controller is 140?A. At its lowest voltage, the voltage controller does not produce less than 800mV. This the controllers dc receives a 70mA nominal current supply.

ADP1882ARMZ-0.3-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE 0.8V

ADP1882ARMZ-0.3-R7 Applications

There are a lot of Analog Devices Inc.
ADP1882ARMZ-0.3-R7 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery