ADI ADP1875ARQZ-1.0-R7

ADP1875ARQZ-1.0-R7 Overview

In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.25V~20V volts and has 3.25V~20V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Power Good, Soft Start, Tracking is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "ADP1875", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 600mV voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1MHz has the maximum frequency. Hence, ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V is used to better suit the DC to DC voltage regulator's situation. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 20V. Since the dc switcher's maximum input voltage is 20V, the voltage must be regulated accordingly. Voltage 2.95V must be supplied. An output current greater than 25A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 18V volts at its peak. 1.1?A volts is the supply current. A voltage controller's lowest output voltage cannot be less than 600mV.

ADP1875ARQZ-1.0-R7 Features

Transistor Driver Outputs
Switching Frequency: 1MHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V

ADP1875ARQZ-1.0-R7 Applications

There are a lot of Analog Devices Inc.
ADP1875ARQZ-1.0-R7 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment