ADI ADP1871ACPZ-0.3-R7

ADP1871ACPZ-0.3-R7 Overview

Capsuled in the 10-VFDFN Exposed Pad, CSP package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 2.95V~20V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 300kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 10 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "ADP1871". Pins number 10 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 600mV voltage. In most cases, the dc dc regulator's output current is 25A. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 84 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. The value of DC to DC voltage regulator is set at MINIMUM OUTPUT VOLTAGE: 0.6V in order to fulfill the requirements more effectively. Users should apply 20V to operate the voltage regulator dc to dc safely and reliably. The maximum input voltage of dc switcher is 20V, so users should limit their voltage accordingly. Voltage 2.95V is needed for the supply. There will be 25A current output from the dc switcher above 25A. The datasheet indicates that the switching converter can output 18V volts at its maximum. A current of 140μA is supplied to it. 600mV voltage output is lower than 600mV. The nominal current supply of this the controllers dc is 1.1mA.

ADP1871ACPZ-0.3-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1871ACPZ-0.3-R7 Applications

There are a lot of Analog Devices Inc.
ADP1871ACPZ-0.3-R7 DC to DC converter applications.

• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools
• Machining centers