ADI AD202JN

Manufacturer No:

AD202JN

Manufacturer:

ADI

Package:

38-DIP (0.600, 15.24mm), 11 Leads

Description:

400?A per Channel 30pA 130 dB Instrumentational OP Amps 15V AD202 10 Pins 38-DIP (0.600, 15.24mm), 11 Leads

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AD202JN information

ADI AD202JN technical specifications, attributes, parameters and parts with similar specifications to ADI AD202JN.

Type
Parameter

Lifecycle Status
PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time
26 Weeks

Mount
Through Hole

Mounting Type
Through Hole

Package / Case
38-DIP (0.600, 15.24mm), 11 Leads

Number of Pins
10

Operating Temperature
0°C~70°C

Packaging
Tube

Pbfree Code
no

Part Status
Active

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
10

ECCN Code
EAR99

Resistance
2GOhm

Technology
HYBRID

Terminal Position
DUAL

Number of Functions
1

Supply Voltage
15V

Base Part Number
AD202

Pin Count
10

Operating Supply Voltage
15V

Number of Elements
1

Number of Circuits
2

Max Supply Voltage
16.5V

Operating Supply Current
5mA

Nominal Supply Current
5mA

Max Supply Current
5mA

Amplifier Type
Isolation

Common Mode Rejection Ratio
130 dB

Current - Input Bias
30pA

Output Current per Channel
400?A

Input Offset Voltage (Vos)
15mV

Bandwidth
2 kHz

Voltage Gain
40dB

-3db Bandwidth
2MHz

Isolation Voltage
750V

Height
8.9mm

Length
53.3mm

Width
17.8mm

REACH SVHC
No SVHC

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Contains Lead

Download datasheets and manufacturer documentation for ADI AD202JN.

AD202JN Overview

A 38-DIP (0.600, 15.24mm), 11 Leads case is used to package the op amp. Isolation-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 10 terminations in the next few months. There are a total of 10 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 10 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 15mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 15V. I would like to point out that this electrical component is capable of working from a voltage below 16.5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 13.5V at all times. 2GOhm should be the range of resistance for the linear amplifier.

AD202JN Features

10 Pins
supply voltage of 15V
40dB voltage gain
Resistance of 2GOhm

AD202JN Applications

There are a lot of Analog Devices Inc.
AD202JN Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.