SKYWORKS AAT4280AIJS-3-T1

Manufacturer No:

AAT4280AIJS-3-T1

Manufacturer:

SKYWORKS

Package:

8-TFSOJ (0.069, 1.75mm Width)

Description:

P-Channel 0.5mm PMIC ASPM? Series 8 Pin 8-TFSOJ (0.069, 1.75mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

AAT4280AIJS-3-T1 information

SKYWORKS AAT4280AIJS-3-T1 technical specifications, attributes, parameters and parts with similar specifications to SKYWORKS AAT4280AIJS-3-T1.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-TFSOJ (0.069, 1.75mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
-40°C~85°C TA

Packaging
Cut Tape (CT)

Series
ASPM?

Published
2010

Feature
Load Discharge, Slew Rate Controlled

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

Resistance
120mOhm

Subcategory
Power Management Circuits

Max Power Dissipation
714mW

Terminal Position
DUAL

Terminal Form
J BEND

Terminal Pitch
0.5mm

Reach Compliance Code
unknown

Current Rating
2.3A

Number of Outputs
1

Qualification Status
Not Qualified

Output Type
P-Channel

Max Output Current
2.3A

Interface
On/Off

Analog IC - Other Type
SPST

Output Configuration
High Side

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
1?A

Input Type
Non-Inverting

Turn On Delay Time
150 ?s

Switch Type
General Purpose

Min Input Voltage
1.5V

Max Input Voltage
5.5V

Ratio - Input:Output
1:1

Voltage - Load
1.5V~5.5V

Rds On (Typ)
80m ?

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for SKYWORKS AAT4280AIJS-3-T1.

Datasheets:

skyworkssolutionsinc-aat4280aijs2t1-datasheets-0843.pdf

AAT4280AIJS-3-T1 Overview

It is packaged in the form of a Cut Tape (CT).It is included with the 8-TFSOJ (0.069, 1.75mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.A total of 8 terminations can be found in it.During operation, the 8 pins are used.To comply with the operation criteria, the maximum output current is reduced to 2.3A.In this case, there is 120mOhm resistance in the LED driving board.It is included in the ASPM? series.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.This LED driving board uses an analog IC SPST.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 1.5V volts for this LED driver.This system has a maximum current requirement of 1?A.

AAT4280AIJS-3-T1 Features

Resistance of 120mOhm

AAT4280AIJS-3-T1 Applications

There are a lot of Skyworks Solutions Inc.
AAT4280AIJS-3-T1 Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.