XF28E120SBTRHBR-Texas Instruments-Price, Stock & Datasheet

The F28E12x is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in motor drive applications.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 160MHz of signal-processing performance for fixed-point code running from either on-chip flash or SRAM.

The F28E12x supports up to 128KB (64KW) of flash memory. Up to 16KB (8KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F28E12x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Eight PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and UART) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000 real-time microcontrollers page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the LAUNCHXL-F28E12X development kit and download C2000Ware.

Real-time processing
- 160MHz C28x 32-bit DSP CPU
- Equivalent to 320MHz Arm Cortex-M7 based device on real-time signal chain performance (see the Real-time Benchmarks Showcasing C2000™Control MCU’s Optimized Signal Chain Application Note)
- Floating Point Unit (FPU) for more precise mathematical calculations
On-chip memory
- Up to 128KB (64KW) of single bank flash (ECC-protected)
- 16KB (8KW) of RAM (Parity-protected)
- Security
  - JTAGLOCK
  - Zero-pin boot
  - Dual-zone security
Clock and system control
- Internal 32MHz oscillator with up to ±1.2% accuracy (SYSOSC)
- Crystal oscillator or external clock input
- Windowed watchdog timer module
- Missing clock detection circuitry
- Dual-clock Comparator (DCC)
3.3V I/O design
- Internal VREG generation allows for single-supply design
- Brownout reset (BOR) circuit
System peripherals
- 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
- 9 digital inputs on analog pins
- One 2-channel Direct Memory Access (DMA) controller
- Enhanced Peripheral Interrupt Expansion (ePIE)
- Multiple low-power mode (LPM) support
- Unique Identification (UID) number
Communications peripherals
- One Inter-integrated Circuit (I2C) interface
- One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)
- One Serial Peripheral Interface (SPI) port
- Two UART-compatible Serial Communication Interfaces (SCIs)
Analog system
- One 9.4MSPS, 12-bit Analog-to-Digital Converter (ADC)
  - Up to 17 external channels (8 shared with GPIO)
  - Three integrated Post-Processing Blocks (PPB) per ADC
- Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
  - Digital glitch filters
  - One DAC output (CMP3_LITE_DACL) available on the pin
- One Programmable Gain Amplifier (PGA)
  - Unity gain support
  - Inverting and non-inverting gain mode support
  - Inputs with 3-to-1 multiplexer
  - Programmable output filtering
Enhanced control peripherals
- 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
- One Enhanced Capture (eCAP) module
- One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
CMAC Keys (128-bit) for SW AES
Package options:
- 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
- 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
- 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
Temperature options:
- Junction (TJ): –40°C to 125°C